Godlyke Power Grip 1M
For the best Pedalboard Dual Lock and Velcro Alternative, try Power-All Power-Grip.
Godlyke Power Grip 1 meter.
For the best Pedalboard Dual Lock and Velcro Alternative, try Power-All Power-Grip. Simple, yet ingenious, Power-Grip pedal board tape mates to itself via rows of tiny mushroom-shaped posts that form a much stronger bond than traditional ''hook & loop'' Velcro fasteners. Just cut to size, apply, and GRIP!
- Mounting surfaces must be free of grease, dirt, loose particles, and moisture.
- Mounting surfaces must be smooth, even and stable.
- Metal surfaces should be cleaned with Acetone prior to mounting.
- Plastic & lacquered surfaces should be cleaned with Lighter Fluid prior to mounting.
- External temperature should be approximately 68° F (20°C) while applying Power-Grip.
- Cut two identically-sized strips of Power-Grip to the desired length.
- Fasten one strip to the object to be mounted and the other strip to the mounting surface.
- Press tape down firmly and evenly – use of a pressure roller is recommended.
- Use additional pairs of strips as needed for a stronger grip.
- For maximum adhesion, expose the adhesive to hot air (140°-180° F) for at least 2 minutes after mounting.
- Allow at least 24 hours for the Power-Grip adhesive to set.
- Press the two Power-Grip strips together and GRIP!